Stainless steel hinges daily maintenance methods

Invisible door hinge - hinge installation method

1. When installing the wooden door (slot installation), first tighten the door and door frame, slot the contact surface of the door and door frame (to install two small hinges), install in the closed state, fix the two large hinges with screws on the door and door frame, and then open the door to 90 degrees positioning state, fix the two small hinges with screws on the door and door frame, complete.

2. aluminum alloy, plastic steel door installation (or in the wooden door without slot installation), first install the hinge on the door frame, and then open the hinge to the automatic fixed position (that is, open the door to 90 degrees when the position), put the door in the door frame (closed state), and then close the hinge, fixed hinge on the door can be completed.

3. The positioning function is fixed for the steel ball, the fixed force is determined by the top wire at both ends of the tube, and the screwdriver can be adjusted appropriately.

Invisible door hinge - Invisible door hinge installation

Step 1: Draw the slot line after the raised alignment line on the back of the hinge is aligned with the door fan and door frame.\

Step 2: When grooving, pay attention to the subtle changes in the depth of the grooving, should be designed according to the slope shape of the blade thickness, the grooving should be opened into a deep outside shallow (near the axis) slope shape, the hinge blade after installation can not protrude the door plane or the door frame plane, but do not slot too deep, the hinge and the door surface should be kept in the same horizontal plane as far as possible.

Step 3: First fix the upper hinge on the door and then fix the lower hinge on the door frame when installing, let the hinge open in a position above 90 degrees (less than 80-90 degrees when the hinge will automatically close) Check the hinge after installation, open and close the door several times to see if the action is smooth.

Step 4: Open the hinge function remove the starting screw with the screwdriver, and the invisible door hinge begins to work. If you feel that the speed and strength are not appropriate, you can adjust it by adjusting the speed screw.

The above is the use and installation method of the invisible door hinge summarized by comfortable 100 network for everyone, and I hope it will be helpful to you. Invisible door is more popular now, the most critical reason for the success of the invisible door is the choice of hinge, a suitable invisible door is not only conducive to opening, but also can be the door gap becomes smaller, so that the invisible door is perfectly integrated with the surrounding.